top of page
Articles
Alexander Stuck
Sep 30, 2024
Original MF-50 Rear Wheel Sources
I have a 1962 model MF-50 and I need a 13.9 X 24 inch rear rim to replace a bad one but I haven’t had any luck locating one. I’m...
2 views0 comments
Alexander Stuck
Sep 30, 2024
Original Hood Hold Down Bolts
I have a TO-35. Is there a secret to the hood hold down-bolts? I have one from Tisco, and one from A&I, and neither seems to fit into the...
1 view0 comments
Alexander Stuck
Sep 30, 2024
Original Finish on Linch Pins
What was the original finish on the Linch Pins and Chain? August 7, 2016. The original finish on linch pins, and other hitch parts were...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Oil Seal at Bottom of TO-20 Distributor
Is there a seal at the bottom of a TO-20 distributor to prevent oil leaks? October 28, 2016. I’ll double check the parts book, but I...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Oil Pump Assembly Too Tight
I am rebuilding the oil pump on my TO-30. It seems to be too tight when I put it together. Can you tell me what is wrong? November 1,...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Oil Pressure Line Routing
What is the proper oil pressure line routing on a TO-30? October 24, 2015. The female threads in the block are 1/8″ pipe thread. The...
2 views0 comments
Alexander Stuck
Sep 30, 2024
Oil in Air Cleaner
How much oil is supposed to go in the oil-bath air filter of a TO 35? July 20, 2016. These oil bath air cleaners are used on tractors,...
2 views0 comments
Alexander Stuck
Sep 30, 2024
OEM Parts
Are OEM parts better? I have heard some say definitely yes, and others say no. January 2, 2016. My answer is a conditional yes, OEM...
3 views0 comments
bottom of page