top of page
Articles
Alexander Stuck
Sep 30, 2024
Marvel-Schebler Carburetor Bushings
The carburetor on my TO-20 has worn bushings for the “butterflys”. Are there parts or comprehensive kits available for Marvel-Schebler...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Market Value 1955 TO-35 with Plow
Can you tell me what the market value of my 1955 TO-35 in good running condition, with a 2-bottom plow is? It’s impossible for me to...
1 view0 comments
Alexander Stuck
Sep 30, 2024
Low Oil Pressure
The oil pressure in my TO-30 is around 20 psi which falls when it is warm, or the tractor is in a pull — why is this and what can I do...
1 view0 comments
Alexander Stuck
Sep 30, 2024
Lost Oil Pressure in TO-30
I changed the oil in my TO-30, and the pressure went to “0” and stayed there. What could cause this? April 12, 2016. Is it possible...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Losing Hydraulic Lift as Oil Temperature Increases
I am working on the lift system of the family TO-30. It loses lift as the gear oil increases in temperature. I have seen a piston on the...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Linch Pin Chains on Later Ferguson Tractors
Are the Linch Pin chains on the F 40 Hydraulic Rocker Link attached in the same place as those on the MH 50, MF 50, etc.? July 4. 2016....
0 views0 comments
Alexander Stuck
Sep 30, 2024
Lighting Fuse Rating
I put a 20 amp inline fuse near the starter solenoid on the hot wire, and I am planning on another for the lights. Is ten amps enough for...
0 views0 comments
Alexander Stuck
Sep 30, 2024
Lift Arms Rise, Don't Fall
I was using a 60″ finish mower attached to my ’53 TEA 20 when for no apparent reason the hydraulic arms lifted up to max height, and...
0 views0 comments
bottom of page