Harrys Tool Box With Bob 27/46

Articles

Sep 30, 2024

MF 22 Disc Parts

I am looking for a bearing for a 22 Massey Ferguson Plow Part #662046M2 and 662047M2. Can you help? The parts you asked about are for a...

2 views0 comments

Sep 30, 2024

Marvel-Schebler Carburetor Bushings

The carburetor on my TO-20 has worn bushings for the “butterflys”. Are there parts or comprehensive kits available for Marvel-Schebler...

0 views0 comments

Sep 30, 2024

Market Value 1955 TO-35 with Plow

Can you tell me what the market value of my 1955 TO-35 in good running condition, with a 2-bottom plow is? It’s impossible for me to...

1 view0 comments

Sep 30, 2024

Low Oil Pressure

The oil pressure in my TO-30 is around 20 psi which falls when it is warm, or the tractor is in a pull — why is this and what can I do...

1 view0 comments

Sep 30, 2024

Lost Oil Pressure in TO-30

I changed the oil in my TO-30, and the pressure went to “0” and stayed there. What could cause this? April 12, 2016. Is it possible...

0 views0 comments

Sep 30, 2024

Losing Hydraulic Lift as Oil Temperature Increases

I am working on the lift system of the family TO-30. It loses lift as the gear oil increases in temperature. I have seen a piston on the...

0 views0 comments

Sep 30, 2024

Linch Pin Chains on Later Ferguson Tractors

Are the Linch Pin chains on the F 40 Hydraulic Rocker Link attached in the same place as those on the MH 50, MF 50, etc.? July 4. 2016....

0 views0 comments

Sep 30, 2024

Lighting Fuse Rating

I put a 20 amp inline fuse near the starter solenoid on the hot wire, and I am planning on another for the lights. Is ten amps enough for...

0 views0 comments