Linkage | Ferguson Enthusiasts

Articles

Sep 30

TO-30 Fork Stabilizer

I’ve been searching desperately for a fork stabilizer for my 1953 TO-30 hydraulic lift system (it was one of the several missing...

0 views0 comments

Sep 30

Replacing F-40 Cross-Shaft Bushings and O-Rings

After replacing the Bushings, and O-Rings on my F-40 Cross-Shaft, I wonder if this service can be done without removing the lift cover?...

0 views0 comments

Sep 30

Removing Top Link Bushings

Can you give me some suggestions on methods to remove the top link bushings on my F-40? They would not press out. They would not drive...

0 views0 comments

Sep 30

Removing Rusted Control Spring Adjusting Yoke and Lift Arms

I am working on a TO-30. It seems every part is either worn pretty well or rusted to the point of being nearly impossible to remove. The...

3 views0 comments

Sep 30

PTO Always Turns

Can you tell me what might be wrong with the PTO on my 1949 Ferguson? The PTO turns all the time, except when you press the clutch, and...

3 views0 comments

Sep 30

Position Control

The lift on my 1949 Ferguson doesn’t seem to be working properly, the lift arms are either all the way up or all the way down. Is this...

1 view0 comments

Sep 30

Linch Pin Chains on Later Ferguson Tractors

Are the Linch Pin chains on the F 40 Hydraulic Rocker Link attached in the same place as those on the MH 50, MF 50, etc.? July 4. 2016....

0 views0 comments

Sep 30

How to Free a Stuck Draft Control Spring

Can you tell me a good approach to breaking free a stuck draft control spring? June 1, 2016. The operator’s manual directs owners to...

0 views0 comments