top of page
Writer's pictureAlexander Stuck

Power Steering Leak

I believe the O-Rings on the power steering at the shaft on my MF 35 are leaking. What will be required too replace them?


There are no O-rings between the steering wheel shaft and the outer housing. The power steering valve is a sealed unit that slips over the steering wheel shaft. If you have oil leaking through the steering wheel shaft the power steering valve is very likely leaking. There are O-rings at the top and bottom of the valve assembly but the leak may be due to a worn valve assembly.


I am not sure the rebuild kit for the valve is still available, but replacement valve assemblies are still available from after-market suppliers. There was a change in the assembly on the MF-35 at serial number 231862. I can send you copies of the section on the power steering valve from the factory shop manual, and an exploded view of the parts, and part numbers from the parts book, but I need to know your tractor serial number to send you the correct version.

0 views0 comments

Recent Posts

See All

Z129 Block in a TE-20

Did some TE-20’s have Z129 engines in them?   TE and TO-20 tractors were all originally equipped with Continental Z120 engines. If you...

Z120 Replacement Block

I live in Central Vermont. I found you folks after stumbling across the Air Force tractor that David Lory has, and striking up a...

Z120 Engine Specifically for the TO-20?

Do you know if the Continental Z120 Engine was made in 1946 specifically for the To-20? or was it made prior, and was it used in...

Comments


bottom of page